Offshore, OceanPulse works with no connection at all: your offline charts, tides, the anchor alarm, and your boat’s instruments never need one. For weather, routes, and safety bulletins, it works over whatever link you have, whether that’s Starlink, an Iridium GO! exec, or a phone roaming abroad. With low bandwidth mode enabled, every download shows its size before you tap it, so you decide what the connection is spent on.
Before you leave#
Do these while you still have good signal:
- Download offline charts for the whole passage, both ends included.
- Plan the passage in Weather Routing and save the route.
- Download the GMDSS bulletins for each METAREA you’ll cross.
- In Account, under Data, enable Low bandwidth mode. If you’ll share a live track, pick how often it sends under Live track sharing.
- Connect to your satellite link at the dock and make one small download, such as a place’s forecast, so you know the steps before you need them.
What each download costs#
Measured on a connection as slow as an Iridium GO! exec’s. Starlink is far faster, but a download is the same size on a plan that charges by the megabyte.
| Download | Size | Time on a GO! exec |
|---|---|---|
| Weather for a 20° by 20° area, the whole forecast: wind, pressure, and waves on one model | 1.2 MB | 2 min |
| A route to Bermuda from New England, three models | 30 KB | Seconds, once it’s routed |
| A place’s 10-day forecast in Daily Summary | 15 KB | 6 s |
| GMDSS: what’s in force, and one METAREA’s bulletins | 10 KB | 7 s |
| One live track position | 6 KB | 5 s |
A weather download grows with the area, and with each layer and model you add. Frame only the water ahead of you and the layers you’ll read: the Download button shows the size first. Data used this session, under the switch in Account, keeps the running total.
Share your position#
Family and crew can follow you on a live track while you’re offshore. In low bandwidth mode, your newest position goes up on the schedule you pick in Account, under Live track sharing:
- Every hour: about 4 MB a month.
- Every 4 hours: about 1 MB a month.
- Only when I ask: positions wait on your device until you tap Send Waiting Positions on the recording card.
Followers see how often to expect you, such as “Positions every hour”, so a quiet hour doesn’t look like a lost signal. To send your position between times, tap Sharing Live, then Send Position Now. Your own recording keeps every position either way.
Starlink#
Starlink is fast enough that OceanPulse works as it does ashore. Two things still matter:
- Metered plans. On a plan that charges by the gigabyte, enable low bandwidth mode. Other apps on your phone still use data in the background, so also turn on Low Data Mode for the Starlink network: in Settings, tap Wi-Fi, tap ⓘ beside the network, and turn on Low Data Mode.
- Power. Many boats run Starlink for part of the day. Make your downloads then. A live track’s waiting position goes up as soon as the connection is back.
Iridium GO! exec#
The GO! exec downloads about 1 MB in a minute and a half, so a whole forecast for your area takes about two minutes.
Set up an OceanPulse profile#
Do this once, at the dock. A profile lets only OceanPulse use the connection, so other apps on your phone can’t spend your data. In the Iridium GO! exec app:
- Open the settings, then Web/App Profiles, and tap +.
- Name the profile OceanPulse.
- Set Rule Policy to Block All Except Filters, and leave DNS Blocking off.
- Tap + beside Profile Rules and add one rule: oceanpulseapp.com, port 443, TCP.
- Save the profile.
A factory reset of the GO! exec deletes its profiles, so take a screenshot of this one.
Download at sea#
- Connect your iPhone or iPad to the GO! exec’s Wi-Fi.
- On the GO! exec, tap the internet icon, choose the OceanPulse profile and a session of about 5 minutes, and tap Connect.
- Make your downloads in OceanPulse, then disconnect.
On a plan with a monthly allowance, such as 5 MB, one whole-forecast area is about a quarter of the month. Frame a smaller area, or fewer layers, and check the size on the button before you tap it.
The original Iridium GO! isn’t supported: it’s too slow for anything but apps made for it.
Roaming and hotspots#
Ashore abroad, on a phone roaming or a marina’s metered Wi-Fi, low bandwidth mode keeps OceanPulse to what you ask for. Turn on Low Data Mode for that network too.